Pixel

DLED-CFK9

DLED-CFK9

9” flat frame-in kits combined with LED module and integral reflector. This is designed for use in non-insulated ceiling. Insulation material must be kept a minimum of 3” from fixture. Provided in high efficacy LED with dimmable driver and the special optical diffusion allows high lumen transmission and light uniformity.

DLED-CFK9 Features

Mounting Frame
  • Galvanized steel construction.
  • Housing adjusts for ceilings up to 1-1/4” thick.
LED module & Trim
  • Aluminum extruded Heat sink designed to facilitate heat dissipation to reduce LED junction temperature for maintaining constant light output, color and life of solid state components.
  • Module construction includes LED, heat sink and lens.
  • Heavy gauge aluminum reflector anodized in clear, haze, gold, champagne and pewter color finish. Reflectors may provide with black and white milled groove baffle collar.
Junction Box
  • Listed for through branch circuit wiring.(Max.8 No 12 AWG 90 degrees C branch circuit conductors. (4 in, 4 out)
  • (5)1/2” knockouts with true pry-out slots and (4) knockouts with Romex cable clamp.
  • Ground wire provided on J-box.
Bar Hangers
  • 24” Bar Hangers provide stability and support on joists and T-Bar Grid ceilings.
  • Housing can be positioned at any point within 24” joist span.
  • Score lines allow “tooless” shortening for 12” joists.
LED POWER SUPPLY
  • 10-100% dimmable for 120V electronic low voltage dimmer switches.
  • Driver feature power factor >.90, THD <20% and has integral thermal protection to sense over temperature or internal failure.
  • Driver mounts externally to the module, allowing future replacement, if needed.
Warranty
  • 50,000hr of lamp life.
Listing
  • ETL Listed.
  • State of california Title 24