DP4S 4″ Square Pole
Features & Benefits
- 4” square, fabricated from high grade structural steel tube
- Shaft conforms to ATSM-A-501-68 specifications
- Shaft meets or exceeds minimum yield strength of 46,000 p.s.i. wall thickness 11 ga. (.120 wall)or 7 ga. (.180 wall), base meets or exceeds minimum yield strength of 36,000 p.s.i.
- Reinforced hand hole is furnished with cover, shaft is furnished with ground lug located inside pole on wall opposite hand hole
- Base telescopes and is circumferentially welded to pole shaft
- Slotted bolt holes provide 1” flexibility on either side of bolt circle centerline
- (4) anchor bolts fabricated from hot rolled steel bar, minimum yield strength of 50,000 p.s.i.
- Bolts have “l” bend on one end and are threaded on the other end.
- Bolts are fully galvanized and are furnished with two nuts and two washers
- Polyester powder coat
Downloads
SPECIFICATIONS
CONFIGURATOR
There is no Series selected for this Product !
Purchase this configuration through an authorized dealer representative. Click below to find one nearest you.