V2 Pendant

V2 Pendant

Vector 2  is a 2 7/16"  Linear architectural luminaire. While Vector has a slim and discreet profile, it provides excellent illumination for high-end spaces including offices, laboratories, libraries, and commercial spaces. The Vector 2 Pendant is available in standard lengths of 2', 3', 4', 6', and 8', and can be joined together in seamless runs of any length in 1 foot increments.

Featuring an efficacy of up to 109 lumens per watt, the Vector delivers maximum illumination paired with minimum power consumption. Title 24 compliant, Vector allows designers to provide excellent illumination while meeting stringent requirements for Title 24 and LEED building projects.

Available with Cross, Corner, and Tee joiner pieces to create unique shapes throughout an interior space -- see Accessories spec sheet for additional information.

Physical Characteristics

Profile Dimensions: 2 7/16" wide X 5" high
Housing: Extruded Aluminum with powder coat finish
Direct Lens: Extruded Satin Acrylic
Indirect Lens: Extruded clear Acrylic
Light Engine: Extruded aluminum powder coated white
Weight: 30 lbs (8ft luminaire); 4 lbs per foot


Delivered Illumination: up to 904 lm/f direct, 1220 lm/ ft indirect
CCT: 2700K, 3000K, 3500K, 4000K
CRI: 90 min with R9 of 50 or better

DIFFUSER The Vector delivers soft, dispersed, and glare-free illumination to properly illuminate today's modern interior spaces and add to the overall value and aesthetic of a space.

INDIRECT/DIRECT OUTPUT Uplight and downlight are individually selectable when ordered, giving designers full freedom to specify their desired ratio of direct and indirect output.

DESIGN FREEDOM A kit of parts to create runs and patterns The Vector family offers standalone lengths of 2 feet, 3 feet, 4 feet, 6 feet, and 8 feet. Runs longer than 8 feet can be created using standardized segments;

  • A First segment has two mounting points, a power feed, and one end cap
  • A Middle segment has one mounting point, no end caps, and power is fed from the previous segment
  • An End segment has one mounting point, an end cap, and power is fed from the previous segment
Runs are created by using 8 foot or 6 foot segments at the beginning of the run, and then shorter segments are used to make up the run length. Please consult the continuous run guide (PDF document) for more details. In addition to runs, patterns can be created using straight segments with four accessories:
  • An Corner section can be used to create L shapes, U shapes, squares and rectangles.
  • A Tee section can be used to create T shapes, or with corners to make rectangles divided into squares.
  • A Cross section can be used to create crosses, or with L sections to create grids, diamonds connected at the corners, and many other shapes.