Vector 2 Surface Mount
Vector 2 Surface Mount
Vector 2 is a 2 7/16″ Linear architectural luminaire. While Vector has a slim and discreet profile, it provides excellent illumination for high-end spaces including offices, laboratories, libraries, and commercial spaces. Ideal for locations with low ceilings, or where fire ratings prevent recessed luminaires, the surface mount Vector is attractive and easy to install. Mounting the Vector is simple: screws or threaded studs pass through the top of the housing to fasten the luminaire in place. The Vector 2 Surface is available in standard lengths of 2′, 3′, 4′, 6′, and 8′, and can be joined together in seamless runs of any length in 1 foot increments. Featuring an efficacy of up to 109 lumens per watt, the Vector delivers maximum illumination paired with minimum power consumption. Title 24 compliant, Vector allows designers to provide excellent illumination while meeting stringent requirements for Title 24 and LEED building projects. Available with Cross, Corner, and Tee joiner pieces to create unique shapes throughout an interior space — see Accessories spec sheet for additional information.
Features & Benefits
Physical Characteristics
End caps: Die-cast aluminum with powder coat finish.
Housing: Extruded Aluminum with powder coat finish.
Direct Lens: Extruded Satin Acrylic.
Light Engine: Aluminum core LED board mounted to a white extruded chassis with integral driver and quick electrical disconnects for rapid tool-less servicing
Performance
Delivered Illumination: up to 1200 lumens/foot at 4000K (see spec sheet for full lumen chart and CCT multipliers)
CCT: 2700K, 3000K, 3500K, 4000K, 5-Channel Color Tuning
CRI: 95 min with R9 of 69 or better
DIFFUSER
The Vector delivers soft, dispersed, and glare-free illumination to properly illuminate today’s modern interior spaces and add to the overall value and aesthetic of a space.
DESIGN FREEDOM A kit of parts to create runs and patterns
The Vector family offers standalone lengths of 2 feet, 3 feet, 4 feet, 6 feet, and 8 feet. Runs longer than 8 feet can be created using standardized segments;
A First segment has two mounting points, a power feed, and one end cap
A Middle segment has one mounting point, no end caps, and power is fed from the previous segment
An End segment has one mounting point, an end cap, and power is fed from the previous segment
Runs are created by using 8 foot or 6 foot segments at the beginning of the run, and then shorter segments are used to make up the run length.
Please consult the continuous run guide (PDF document) for more details.
In addition to runs, patterns can be created using straight segments with four accessories:
An Corner section can be used to create L shapes, U shapes, squares and rectangles.
A Tee section can be used to create T shapes, or with corners to make rectangles divided into squares.
A Cross section can be used to create crosses, or with L sections to create grids, diamonds connected at the corners, and many other shapes.
SPECIFICATIONS
CONFIGURATOR
Purchase this configuration through an authorized dealer representative. Click below to find one nearest you.